Kako održavati vodu u bazenu?

Postoje tri načina čišćenja bazena:

First, getting & nbsp; the clear water by removing part or all of the debris in the swimming pool: generally, remove the visible suspended solids in the swimming pool water by physical means, like by circulating filtration and vacuum. Swimming pool vacuum is a very important work of swimming pool cleaning. The daily cleaning of swimming pool is achieved through the circulating filtration of water, but the circulating filtration can not filter out the tiny particles. At this time, we need to first sink the suspended particles into the bottom of the pool, and then use pool cleaners to conduct the suction operation. There are two kinds of swimming pool cleaners: & nbsp;Manual Pool Cleaner and Automatic Pool Cleaners. & nbsp;

Drugo, možemo dobiti & nbsp; dobra kvaliteta vode dodavanjem novih komponenti u bazensku vodu: na primjer, zahtjev za sadržajem zaostalog klora u vodi možemo postići stavljanjem dezinfekcijskog sredstva (trikloroizocijanurna kiselina / TCCA) u bazen, a kontrolnu vrijednost pH stavljanjem pahuljica alkalnog ili natrijevog karbonata. I stavljanje algaecida za uklanjanje algi u vodi. Ovi se radovi uglavnom postižu kemijskim sredstvima - dodavanjem kemikalija.

Third, it was mentioned before that sedimentation should be done before using pool cleaners: first add water treatment reagent, and then obtain the required water quality through physical means. When the water in the swimming pool can not reach the wanted pool water quality by circulation or absorption. & nbsp; the clarifier shall be put in first, and after alum and sedimentation, the pool cleaners shall be used for absorption; or the clear water clarifier (it is the clarifier without precipitation and absorption) shall be put in, and only the circulating filter equipment shall be opened for filtration after adding.